Manual Call Points

Product Details:

Supply voltage 17-35V DC Digital Communications Protocol CoreProtocol, Discovery & XP95 compatible 5-13V Peak to Peak Current Consumption (max) at 24V DC Power Up Surge (1s typical) 1mA Quiescent 100µA Alarm current (LED On) 4mA Operating temperature -40°C to 70°C Humidity 0% to 95%RH (no condensation or icing) Vibration, impact and shock EN 54-11 & EN 54-17 (Red version only) IP Rating IP44 Approvals & standards EN 54-11, EN 54-17, CPR & LPCB (Red version only) Dimensions 90mm height x 90mm width x 63mm depth Weight 180g

Product Details:

Apollo's XP95 Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allows for a quick and simple reset.

Product Details:

The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass. Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

Product Details:

Connecting to the loop of GST fire alarm system, DI-9204E Digital Manual Call Point is suitable for public places. When there is fire, pressing the action plate on the MCP can send the alarm signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound. 

Product Details:

The Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated by pressing the resettable element. The manual call point signals to the Control and Indicating Equipment using an interrupt feature within the Apollo Digital Protocol.

Product Details:

The Manual Call Point F/MCP/GLASS is designed to provide an interface for causing an alarm on a fire alarm system. A two wired general connection is used to connect the unit to control panel; this connection allows for both alarm signaling and normal LED operation.

Product Details:

Features

• EN54-11 Approved Type A Indoor Use.
• Re-Settable by an element kit.
• Suitable for flush or surface mounting
• Module Addressing by 8 way DIP Switches.
• Low Standby Current.

Product Details:

Xp95 Is Manual Call Point is designed to be used in residential societies, shopping malls, convenience stores, theaters, and industries. It is required to manually raise alarm during fire situations. This call point assembly is provided with an element that can be reset with the help of a specific key. All the components of MCP are enclosed in a fire retardant polycarbonate body. It can easily be used by just pushing the button provided in the front.
Price Range: Rs. 500 onwards

Product Details:

The Discovery Manual Call Point is commonly used to manually control extinguishant release.

 

• EN 54-11 Certified
• Reports an alarm in under 0.2 seconds
• 'Plug and Play' terminal connections for faster wiring
• Continuity link for wiring test before commissioning
• Suitable for semi flush or surface mounting
• XP95 & Discovery compatible

Product Details: