Conventional Control Panel

Product Details:

• As per IS -15908: 2011 Standard.
• 16 X 2 Dot Matrix LCD Display.
• Standby battery backup with built in charging.
• Fire / Fault status in unambiguous colored LED indication.
• Switch Mode Power Supply.
• Tactile Keypad for easy panel operation.
• System ON indication.
• Main, Standby status indication.
• Low Battery visual warning with audible tone.
• Relay output for actuators, for Fire and Fault.
• Lamp Test facility
• Zone wise one man Walk Test Facility.
• Zone wise Isolation facility with loop voltage cut off.
• Compatible to all type of Conventional Detectors.
• Optional Zone Wise Sounder / Zone Wise Contact.

Product Details:

Main Features

• 20 X 4 Dot Matrix LCD display.
• Alphanumeric keypads.
• RS-485 Communication for Network Repeater.
• System ON, AC ON, Battery ON, Charger ON indications.
• Drill test / Evacuate facility.
• Lamp test facility.
• Maximum 16 Mainpanels includes repeaters can be
• connected in a Single Network through RS-485.

Product Details:

Fully Confirm IS 2189.  Zone Wise Fire Fault LED Indication.  Zone Isolation Facility.  Mains on, System On, Charger on, visual indications.  Auto dialer attachable facility  External s/w for reset, Silence, Lamp test.  External s/w to test each zone fire, open, short status manually.  Inbuilt Buzzer.  16x2 Line LCD Display.  Inbuilt Battery Charger & Battery Space.  Potential Free Contact Facility.

Product Details:

Agni Orion Series Microprocessor Based Conventional Fire Alarm Panels provides a reliable and cost effective solutions to fire detection, for small installation which is 2 zone. These units have been designed to offer high standards of performance, reliability and quality and comply with IS 2189:1999 and tested by the ERTL N & System Sensor. The Orion series panels are specially suited for the small offices & workplaces.Features:2 x 16 character backlit LCD display, Lamp test features, Complete with integral power supply and battery charger for SMF battery, NO/NC contacts for both fire and fault, Switches to enable on board operation, LCD and LED Indication for open, short circuit, Isolate, Fire in each zone, Maximum no. of Detectors in each zone is 25

Product Details:

• CE Approved.
• 16 X 2 Dot Matrix LCD Display.
• Standby battery backup with built in charging.
• Switch Mode Power Supply.
• Tactile Keypad for easy panel operation.
• System ON indication.
• Low Battery visual warning with audible tone.
• Fire / Fault status in unambiguous colored LED indication.
• 2 programmable relays for fire, supervisory and fault.
• All zones accept smoke detectors and any normally open contact device.
• Any Zone can be configured as alarm or supervisory.
• Zone wise isolation and one man walk test facility.
• Programmable Aux Outputs.
• Lamp test & Drill test facility.
• 100 All Events log with RTC.
• Date / Time / Password configuration.
• Programmable auto silence facility.
• Zone wise sounder / contact (optional).
• TCP-IP / GSM facility (optional).
• All field wiring circuits are supervised.

Product Details:

• CE Approved.
• 16 X 2 Dot Matrix LCD Display.
• Standby battery backup with built in charging.
• Switch Mode Power Supply.
• Tactile Keypad for easy panel operation.
• System ON indication.
• Low Battery visual warning with audible tone.
• Fire / Fault status in unambiguous colored LED indication.
• 2 programmable relays for fire, supervisory and fault.
• All zones accept smoke detectors and any normally open contact device.
• Any Zone can be configured as alarm or supervisory.
• Zone wise isolation and one man walk test facility.
• Programmable Aux Outputs.
• Lamp test & Drill test facility.
• 100 All Events log with RTC.
• Date / Time / Password configuration.
• Programmable auto silence facility.
• Zone wise sounder / contact (optional).
• TCP-IP / GSM facility (optional).
• All field wiring circuits are supervised.

Product Details:

• Primary Power- 120 / 220VAC + 10 percent -15 percent, 60 / 50 Hz 60W
• Stand by Power -   24VDC 2 Nos of 12V, 7Ah Sealed Lead acid battery
• Quiescent current -  0 - 49 degree C 32-120 degree F
• Relative Humidity -  - 93 2 percent RH (non- condensing)  at 32 2 degree C/90 ±3 degreeF.

Price Range: Rs. 1000 Onwards

Product Details:

The microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Product Details:

The RE – 120GR is a 2 zone Dedicated microprocessor based conventional Fire Alarm Gas Release Panel. The Panel accepts water flow devices, conventional input devices like 2 wire and 4 wire smoke detectors, pull stations and other normally open contact devices in Fire Zone inputs.

Product Details:

Honeywell System Sensor Fire Alarm Control Panels have been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions. The panels have been designed with both installer and end user’s requirements in mind suited for small to medium sized buildings like Commercial Buildings, Banking, Residential complexes, Retail Units/ Stores, Shops, Restaurants, Healthcare, Public Offices, Schools etc