Addressable Fire Detectors

Product Price :Get Latest Price

Product BrochureProduct Details:

An addressable smoke detector is part of an addressable fire alarm system that consists of a group of smoke detectors and devices linked to a central fire control panel. In an addressable fire alarm system, an activated smoke detector can quickly be isolated and found because each device has a unique address or number.
Features:

• Effective customer support
• On-time completion
• Applied latest methodology

Get the best price for Addressable Smoke Detector

Product Price :Get Latest Price

Product BrochureProduct Details:

IGENT FIRE DETECTORS • Discovery Optical Smoke Detector The Discovery Optical Smoke Detector is suitable afor slow burning or smouldering fires and should be positioned where these are most likely to occur. They can be set to a sensitivity mode best suited for the application. Part No. 58000-600 Discovery Optical Smoke Detector • Discovery Multisensor Detector The Discovery Multisensor Detector comprises optical smoke and temperature sensors whose outputs - are combined to report a single value to the fire Sc control panel. With a view to improving false alarm management the smoke and heat values can also be reported separately, provided that the fire control panel is programmed with appropriate software. Part No. 58000-700 Discovery Multisensor Detector • Discovery Ionisation Smoke Detector The Discovery Ionisation Smoke Detectors use a low activity radioactive foil to detect fires by irradiating i the air in the smoke chambers and causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm. It is a good general purpose detector that responds well to fast burning, flaming fires. Part Na 58000-500 Discovery Ionisation Smoke Detector • Discovery Heat Detector The Discovery Heat Detector, distinguishable by the low airflow resistant case, uses a single thermistor to sense the air temperature around thedetector. Ibis type of detector is particularly useful where the environment is dirty or smoky under normal conditions. Part No. 58000-400 Discovery Heat Detector • Discovery CO Detector The DiscovesyCO Detector is very sucessful at detecting deep-seated fires. It enhances detection capability, is ideal for smoldering fires and is less susceptible to C. false alarms caused by steam than smoke detectors. Note: The CO detectors are not replacements for smoke detectors. For application guidelines, please refer to the Discovery Engineering Product Guide PP2052. Part No. 58000-300 Discovery CO Detector

Discovery is a range of high-specification, intelligent fire detectors developed to meet the requirements of sophisticated systems while providing engineers with an additional dimension in fire protection capability. Discovery detectors can be set to a sensitivity mode best suited for the application. Discovery gives you total reassurance in installations where adaptability to changing conditions and protection against unwanted alarms are paramount. Manual Call Point • The Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allows for a quick and simple reset. Part No. SA5900-908 InteNgent Manual Call Point 58200-950 Waterproof Addressable Manual Call Point 58200-951 Waterproof Addressable Manual Call Point with Isolator Fire Control Panel Compatibility Discovery products are designed to be operated with purpose-designed control and indicating equipment that makes full use of Discovery features. Discovery devices can be connected to CoreProtocol or XP9S fire control panels but not all Discovery features will be accessible on XP35 systems. For a list of compatible panel manufacturers, Compatible Products Access to the Discovery range of audible and visual signalling equipment with advanced features such as choice of volume levels, tones, including class change. Drift Compensation All Discovery smoke detectors include compensation for sensor drift caused, for example, by dust in the chamber, and will hold the sensitivity at a constant level even with severe chamber contamination.

Price Range: Rs. 1000 Onwards

Product Price :Get Latest Price

Product BrochureProduct Details:

The Orbis Optical Smoke Detector operates on the well-established light scatter principle. The sensing technology used is radically different from previous optical detectors and significantly reduces false alarms. Chamber with surface-mount infrared emmiter and prism. Solid state integrated photo-diode and amplifier.

Product Price :Get Latest Price

Product BrochureProduct Details:

Description. The XP95 Intelligent Mounting Base is suitable for use with all the detectors in the XP95/Discovery range. The Mounting Base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases.

Product Price :Get Latest Price

Product BrochureProduct Details:

The Discovery Optical Detector has a white moulded polycarbonate case with wind-resistant smoke inlets. The indicator LEDs are colourless when the detector is in quiescent state and red in alarm.

Product Price :Get Latest Price

Product BrochureProduct Details:

An addressable smoke detector is part of an addressable fire alarm system that consists of a group of smoke detectors and devices linked to a central fire control panel. In an addressable fire alarm system, an activated smoke detector can quickly be isolated and found because each device has a unique address or number.

UL Listed Analogue addressable smoke detector with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in color,shall be polarity insensitive, Insect filter chamber, easy to install, advanced detection and communication protocol.

Get the best price for Ravel Addressable Smoke Detector

Product Price :Get Latest Price

Product BrochureProduct Details:

HM Series Detectors Data SheetDelivering a totally new detector platform,incorporating an advanced digital protocol

Product Price :Get Latest Price

Product BrochureProduct Details:

The MI-PSE-S2 photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and development. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris.

The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms.

The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed. The MI-PSE-S2 has two integral tri-colour LEDs that provide 360° local visual indication of the device status. The LEDs are programmable with static or blinking red, amber and green status indications available.

Product Price :Get Latest Price

Product BrochureProduct Details:

• UL listed.
• Dual LED’s for 360° visibility.
• Advanced detection and communication protocol.
• Polarity Insensitive.
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 1OOmm base.
• Address setting by 8 digit DIP switch.

Product Price :Get Latest Price

Product BrochureProduct Details:

Electric Photoelectric Apollo Panel Discovery Optical Smoke Detector, For Office Buildings ; Alarm Sensor Type. Photoelectric ; Power Source.

Product Price :Get Latest Price

Product BrochureProduct Details:

^{The Orbis Optical Smoke Detector operates on the well-established light scatter principle. The sensing technology used is radically different from previous optical detectors and significantly reduces false alarms.}

Product Price :Get Latest Price

Product BrochureProduct Details:

Removable, High Performance chamber   Twin LEDs allow 360  viewing – green when polling, turn red in fire  Locking mechanism (sensor to base)  Variable sensitivity  Electronically addressed   Pulsing/non-pulsing controlled from panel*  Approved by LPCB & VdS   SIL Level 2 approved variants available  Available in white

Product Price :Get Latest Price

Product BrochureProduct Details:

• Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
• Ideal for escape routes
• Unaffected by wind and atmospheric pressure
• Insect resistant screen

Product Price :Get Latest Price

Product BrochureProduct Details:

Advanced multi-sensor designs

Built-in line isolator (851PH Only)

Quick and easy to install

Extended drift compensation

Two way infra-red communication to the 850EMT Engineering Management Tool

Fire, isolate and fault LED indications

Any Pantone colour available with CPD approval

Comprehensive range of bases and base accessories

Product Price :Get Latest Price

Product BrochureProduct Details:

The Discovery Optical Smoke detector works using the light scatter principle and is ideal for application where slow burning or smouldering fires are likely


Get Best Price Of The APOLLO DISCOVERY OPTICAL SMOKE DETECTOR 58000-601.

Product Price :Get Latest Price

Product BrochureProduct Details:

Product Price :Get Latest Price

Product BrochureProduct Details:

Put simply, a heat detector - or heat alarm - is a device that''''''''s used to detect any substantial increase in temperature which may indicate a fire is about to break out.

Product Price :Get Latest Price

Product BrochureProduct Details:

Multi-sensor detectors use a combination of more than one type of sensor – smoke, heat or carbon monoxide – to detect the presence of a fire.

Product Price :Get Latest Price

Product BrochureProduct Details:

Each TrueAlarm detector has an on-board microprocessor that evaluates its photoelectric light scattering chamber activity and makes an intelligent decision based on light obscuration history as to whether an alarm condition is present

Product Price :Get Latest Price

Product BrochureProduct Details:

The Simplex 4098-9754 TrueAlarm multi-sensor 4098-9754 combines the established performances of a TrueAlarm photoelectric smoke sensor with a fast-acting and accurate TrueAlarm thermal sensor to provide both features in a single sensor/base assembly.

Product Price :Get Latest Price

Product BrochureProduct Details:

Each TrueAlarm detector has an on-board microprocessor that evaluates its photoelectric light scattering chamber activity and makes an intelligent decision based on light obscuration history as to whether an alarm condition is present.

Product Price :Get Latest Price

Product Details:

Price Range: Rs. 5000 Onwards
Intrinsically Safe Ionisation Smoke DeteEach detector is equipped with two LEDs that provide a local, visual indication of detector status. Once the detector senses a fire, it latches on in alarm and remains the state until it is reset by a momentary power interruption.

Product Price :Get Latest Price

Product Details:

An optical smoke alarm (also called photo-electric smoke alarm) works using the light scatter principle. The alarm contains a pulsed infrared LED which pulses a beam of light into the sensor chamber every 10 seconds to check for smoke particles.

Product Price :Get Latest Price

Product Details:

The HFI-PA-05 Intelligent Optical Smoke Detector is a point detection device that continuously monitors the air in the protected area to provide the earliest warning of a fire condition.

Product Price :Get Latest Price

Product Details:

A Fire Alarm System has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire or other emergencies are present. These alarms activated automatically through smoke detectors, and heat detectors & also activated via manual fire alarm activation devices.

Product Price :Get Latest Price

Product Details:

The HM/RHSE thermal detector provides fixed 58°C and rate-of-rise (10°C/minute) temperature sensing (Class A1R). The HM/FHSE thermal detector provides fixed 58°C temperature sensing (Class A1S). The detectors have two integral red LEDs that provide 360° local visual indication of the device status.

Product Price :Get Latest Price

Product Details:

Each XP95 device responds to interrogation and command from central control equipment. It communicates to the panel information on status, command bits, type, location, and other information that allows an alarm to be raised even when the device is not itself being interrogated. Message error checking is also provided.

Product Price :Get Latest Price

Product Details:

General Features• Multiple fire detection modes• FireClass detection algorithms• CO fire detection technology• Up to 250 detectors per loop• Optional bi-directional line isolation• Remote detector verification & temperature read out• Highly featured service tool• Programmable alarm LED with 360º viewing angle• Optional detector locking pin• Variety of sounder and relay detector base• Internationally approved

Product Price :Get Latest Price

Product Details:

Responds well to slow-burning, smouldering fires

Well suited for bedrooms and escape routes

360C visibility of LEDs

Reduces false alarms

Quick and simple installation

Brand Features:

Flexible

Reliable

Cost-effective

Compliant with BS 5839

Easy to install

Easy to extend

Product Price :Get Latest Price

Product Details:

Low profile Heat, Optical and CO sensing elements CO Alarm (COHb) facility 10 year CO sensor life Programmable fire threshold level RI & LED controllable separately if required*1 2 colour LED (Polling: Green, Fire: RED) Multiple modes

Product Price :Get Latest Price

Product Details:

SLC LOOP: • Two-wire SLC loop connection • Unit uses base for wiring • Compatible with FlashScan® and CLIP protocol systems • Stable communication technique with noise immunity ADDRESSING: • Addressable by device • Rotary, decimal addressing (Refer to the NOTIFIER panel manuals for device capacity.) ARCHITECTURE: • Sleek, low-profile, stylish design • Unique single-source design to respond quickly and dependably to a broad range of fires • Integral communications and built-in device-type identification • Built-in tamper resistant feature • Remote test feature from the panel • Walk test with address display (an address on 121 will blink the detector LED: 12-[pause]-1(FlashScan systems only) • Built-in functional test switch activated by external magnet • Removable cover and insect-resistant screen for simple field cleaning • Expanded color options OPERATION: • Designed to meet UL 268 7th Edition • Factory preset at 1.5% nominal sensitivity for panel alarm threshold level • LED “blinks” when the unit is polled (communicating with the fire panel) and latches in alarm. • Low standby current MECHANICALS: • Sealed against back pressure • SEMS screws for wiring of the separate base • Designed for direct-surface or electrical-box mounting • Plugs into separate base for ease of installation and maintenance • Separate base allows interchange of photoelectric, ionization and thermal sensors OPTIONS: • Optional relay, isolator, and sounder bases

Get the best price for Addressable Photoelectric Smoke Detectors

Product Price :Get Latest Price

Product Details:

An addressable system utilises a loop configuration containing all the fire alarm devices, including sounders and beacons/VAD. A loop wired system uses less cable compared to that of a more extensive conventional system. Each device on an addressable system utilises a system-wide protocol

Model ALN-EN(SCI) is a Photoelectric Smoke Sensor with SCI, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.

Get the best price for Hochiki Addressable Fire Alarm System

Product Price :Get Latest Price

Product Details:

The NOTIFIER FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards.

Product Price :Get Latest Price

Product BrochureProduct Details:

Ionization smoke alarms are generally more responsive to flaming fires. How they work: Ionization-type smoke alarms have a small amount of radioactive material between two electrically charged plates, which ionizes the air and causes current to flow between the plates.

Product Price :Get Latest Price

Product Details:

The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected.

Product Price :Get Latest Price

Product BrochureProduct Details:

XP95 Optical Smoke Detector The XP95 Optical Smoke Detector uses an internal pulsing infrared LED and a photo-diode at an obtuse angle. In clear air conditions the photo-diode in the XP9S detector receives no light from the LED and produces a corresponding analogue signal. The signal increases when smoke enters the chamber and light is scattered onto the photo-diode. The optical smoke detector has a clear indicator LED which emits red light when the detector is in alarm. Part No. 55000-600 XP95 Optical Smoke Detector .

XP95 Heat Detector The XP95 Heat Detector is distinguishable from the smoke detectors by its low air-flow resistance case which allows good contact between the sensing thermistor and the surrounding air. The device monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature. Part No. 55000-400 XP95 Heat Detector A2S 55000-401 XP95 Heat Detector CS XP95 Optical/Heat Multisensor Detector The XP95 Optical/Heat Multisensor Detector combines inputs from optical smoke and heat sensorsand processes them using a sophisticated algorithm. It is designed to be sensitive to a wide range of fires and may be used in place of an ionisation detector in many instances. The detector''''''''s construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor temperature sensor. Part No. 55000-885 XP95Optiod/HeatMultisensor Detector .

XP95 Ionisation Smoke Detector The air in the dual chambers of the XP95 Ionisation Smoke Detector is irradiated to produce ions that travel to the positive and negative electrodes and hence create a current flow in the chambers. Smoke entering 
the outer chamber causes a drop in the current flow and an increase in the voltage measured at the junction between the outer and inner chambers. The analogue voltage signal produced is converted to a digital signa by the electronic circuitry and transmitted to the control equipment on interrogation. The micro-processor in the control equipment then compares the signal with the stored data and initiates a pre-alarm or fire alarm as smoke density increases. The ionisation smoke detector is externally similar to the optical detector but is distinguished by having a red LED. When the equipment determines that a fire condition exists, it instructs the detector to switch on its indicator LED and the pre-planned alarm routine is initiated. Part No. 55000-500 XP95 Ionisation Smoke Detector XP95 Intrinsically Safe Detector XP95 Intrinsically Safe (I.S.) Detectors include all the benefits of the standard XP95 range, but are developed specifically for use in hazardous areas. This range includes ionisation and optical smoke detectors, heat detectors and manual call points, BASEEFA approved to Ex la IIC TS. XP95 1.S. detectors and manual call points have a number of marine approvals. These include Marine Equipment Directive (MED), Lloyds Register EMEA (LR) and many more which can be viewed on our web site. For more information, please refer to Apollo publications PP1094 and PP1095.

Price Range: Rs. 1000 Onwards